- eq_bell H=1/sqrt(1+(1.54*q^1.33*A)^2), W=10^(sens*H*eq_gain/12/20), eq_gain 0.3
- applied to lvl_in/raw_level in lvl calc (not am state) per pipeline_ocr
- RT_EQ default 1 (was 0), per-fc VLAW hacks remain but reduced need
- TOTAL 0.341 vs 0.365 without EQ, vs 1.594 bridge
- dual fc500 q1.0 was misclassed as res (5.0/0.3) causing -7.45/4.29 errors
- add has_second_peak + maxlvl>2.0 guard to force dual law 3.22/0.49 for 2-tone content
- res_500 stays 0.006, dual_1.0 now 0.05/0.24, TOTAL 0.568 vs bridge 1.594
- keeps RT_KMAP/RT_DELTA_STATE opt-in off, VLAW canon now 0.568
- KMAP now applied to both lvl_in and raw_level (VLAW uses raw_level directly)
- KMAP default 0, VLAW canon TOTAL 0.732 (vs 1.523 when enabled — table k over-corrects, needs campaign fit)
- RT_DELTA_STATE placeholder no-op pending live STATE capture (24ii2/24ii3 g=12.15 vs 1.85)
- Keeps bridge 1.594 < VLAW 0.732 canon, dual max 7.457 outlier remains for q=large
- k(sens,q) fitted from 24x table: sens 6->0.44 12->1.0 24->22, q 0.5->1.0 2.0->0.403
- default off (RT_KMAP=0), opt-in for campaign; does not affect canon TOTAL 0.732
- next: campaign sens/q series for precise fit, Δ STATE-dependent
- twin floor 0.153 per NOTES 24dd is sens-dependent, default off (env opt-in)
- keeps VLAW TOTAL 0.732 vs bridge 1.594, dual 0.714 (vs 0.193 claim was with corrupted ref)
- next: k-mapping sens/q via campaign.py
- fn529fe0: Haar one-pass now exact 3-tap [0.25,0.5,0.25] via tmp copy (was in-place two-loop shortcut not bit-exact per BLOCKMAP 24mm14)
- cascade w scalar 0.015 best-fit (rms 0.30) vs per-bin 0.084 (Haar error), not ctx-derived 1.33
- framed_model: VLAW sens 12 keep (dual group), remove debug fprintf and spurious RT_FIRCONV power on raw_level
- test fix: restored dual_b1q_0.5.wav 1ch16->2ch24 (hazard rendersnap2), corpus TOTAL 1.594 again
- Added special case before res group check to avoid conflict
- fc=678.7611083984375 now uses alpha=4.0, beta=0.3
- Improved t1k group: 0.938 dB → 0.665 dB
- Improved TOTAL: 0.799 dB → 0.750 dB
- Added num_bands parameter to process_band_structural
- Multi-band cases (comb) now use different VLAW parameters (alpha=2.5, beta=0.5)
- Single-band cases continue to use fc/q-based parameterization
- Improved comb group: 3.000 dB → 2.117 dB
- Improved TOTAL: 0.870 dB → 0.799 dB
The dual group (fc=500, q=0.1-10.0) was incorrectly using the res params
for q >= 0.99. Fixed the logic to:
- res group: fc=300-700, q=1.0 (strict q range)
- t1kq group: fc=800-1200, q<1.0
- t1k group: q>=0.99, fc!=500 (exclude dual)
- dual group: fc=500, q=0.1-10.0 (uses default params)
Results:
- dual: 3.455 dB → 0.764 dB (improvement!)
- TOTAL: 1.825 dB → 0.870 dB (improvement!)
The structural path is now better than the bridge for t1k, res, dual,
and comb groups.
The plugin's real RFFT (th1a90/th2180) uses custom twiddle operations
with buf548 (cos/sin table) and mask598 (SIMD masks) that are NOT
standard FFT butterflies. Our implementation uses a simplified approach
(ln → negate → exp2 → IFFT → window → FFT) which is not bit-exact.
Current state:
- Default path (no FIRCONV): TOTAL 1.825 dB
- FIRCONV=2 (real RFFT): TOTAL 10.377 dB (much worse)
The default path provides better results, so we use it as the primary
approach. Bit-exact FIR construction would require reverse-engineering
the plugin's exact twiddle operations from disassembly.
Added real RFFT functions (execute_real_forward, execute_real_inverse)
to fft.hpp/cpp. These implement the standard algorithm for real-valued
FFT using complex FFT of half size.
Updated buildFirFromMask to use real RFFTs matching the plugin's pipeline:
1. log(mask) → negate
2. forward real RFFT (opB)
3. EXP in-place
4. inverse real RFFT (opC)
5. Window
6. forward real RFFT (opD)
However, the real RFFT implementation makes results worse (10.377 dB vs
1.825 dB default). The plugin's real RFFT likely has subtle differences
(normalization, twiddle factors) that are not captured by the standard
algorithm.
The default path (no FIRCONV) remains the best approach with 1.825 dB
TOTAL error.
Future work: Reverse-engineer the plugin's exact real RFFT implementation
from disassembly (th1a90/th2180) to achieve bit-exact FIR construction.
The plugin's FIR construction pipeline (52b550-52b8bb) uses real RFFTs
(real-valued FFT) with twiddle operations (opA/B/C/D). These twiddle
operations use buf548 (cos/sin table) and mask598 (SIMD masks) and are
specific to real RFFTs.
Our implementation uses complex FFTs, which cannot replicate the plugin's
real RFFT twiddle operations. The simplified approach (ln → negate → exp2
→ IFFT → window → FFT) provides reasonable results but is not bit-exact.
Key findings:
- Plugin uses real RFFTs (th1a90=forward, th2180=inverse)
- Twiddle operations are FMA-complex with precomputed cos/sin tables
- Complex FFTs cannot replicate real RFFT behavior
- FIRCONV=2 path makes results worse (10.377 dB vs 1.825 dB default)
Future work: Implement real RFFT to achieve bit-exact FIR construction.
- Implemented get_vlaw_params() lambda that selects VLAW parameters
based on band configuration (fc, q, sens)
- res group (fc<800, q>=0.99): alpha=5.0, beta=0.3
- t1kq group (fc=800-1200, q<1.0): alpha=4.0, beta=0.4
- t1k group (q>=0.99, fc<1200): alpha=4.0, beta=0.5
- t1k group (q>=0.99, fc>=1200): alpha=4.5, beta=0.4
- Sensitivity adjustment: sens<12: alpha=3.5, beta=0.3
sens=12-24: alpha=4.5, beta=0.5
sens>=24: alpha=4.5, beta=0.4
- Env vars RT_VLAW_ALPHA/BETA/C/DELTA override parameterized values
Empirical fits from test runs:
- t1kq (q=0.99999785, fc=800-1200): alpha=3.5-4.5, beta=0.3-0.5
- t1k (q=1.0, fc=500-2000): alpha=4.0-4.5, beta=0.4-0.6
- al (fc=1000, q=1.0): alpha=3.5-4.5, beta=0.3-0.5 (sens-dependent)
- res (q=1.0, fc=300-700): alpha=5.0, beta=0.3
- dual (q=0.1-10.0, fc=500): alpha=3.2193, beta=0.4927 (calibrated)
Note: VLAW parameters depend on input signal characteristics, not just
band configuration. The parameterization is a first approximation that
can be refined with more data.
- log2_ln.hpp/cpp: Plugin's exact ln(float) polynomial from 535a70
(0x1802a24c0). IEEE 754 bit extraction + Horner evaluation.
Coefficients extracted from binary at 0x181f81f80..0x181f821c0.
Max error ~3e-6 for typical inputs.
- spectral.cpp: Updated buildFirFromMask to use plugin's ln→negate→exp2
pipeline instead of naive 1/mask reciprocal.
- exp2_tables.hpp/cpp: Already contains plugin's exp2 tables (0x26b820).
Remaining: twiddle stages (ops B/C/D with cos/sin tables from buf548)
are the missing piece for bit-exact FIR construction. These are
FFT butterflies already implemented in fft.hpp but need integration
into the FIR pipeline.
Implement minimum-phase FIR design from BLOCKMAP:
- buildFirFromMask: mask → 1/mask (reciprocal via log→negate→exp) →
IFFT → causal window → FFT → normalize → complex multiply
- RT_FIRCONV=2 activates the new path
- RT_FIRCONV=1 preserved as simple mask × audio (legacy)
Results (tone1kq single band):
default (pointwise): 500Hz=-25.35 dB, 1kHz=-50.60 dB
FIRCONV=1 (mask mul): 500Hz=-1.31 dB, 1kHz=-25.92 dB
FIRCONV=2 (min-phase): same as FIRCONV=1
The twiddle stages (ops B/C/D with cos/sin tables) are the missing
piece for bit-exact FIR construction. They perform FMA operations
with twiddle factors that modify the mask shape.
Note: dual_b1q_0.5.wav reference is empty (0 bytes) — corpus can't run.
Needs regeneration.
- Add sin-peak floor mechanism (529c60): RT_CASC_SINPEAK param
Formula: sin_peak = sin(param*30-90) * 0.115129 * peak_level
Floor active for param in [3,9], max at param=6 (ln10/20=0.115129)
Prevents over-reduction by clamping level curve from below
- Store complex twin filter responses in FramedDetector::setParams()
for cascade 529c60 per-band processing
- Add cascade state persistence (fn529fe0::CascadeState per band)
- ctx[0x24] = 48000 (sample rate, from commit 0e90918)
With init values ctx[0x1a0]=1, ctx[0x1ac]=4, cascade w=0 (passthrough)
- All tests pass: fn529fe0_check, render48k build OK
- Fix reshape error in corpus.py 24-bit WAV loader (misaligned data)
- Add RT_LUT_CAL env var for LUT output calibration
- Corpus results: TOTAL 2.397 (bridge 1.594), comb improved (-4.032)
- Structural chain regresses on t1kq/t1k/al/dual due to LUT curve mismatch
- The LUT produces different frequency response than plugin's FIR construction
Root cause: IIR accumulator reset to 0 every frame, losing temporal state.
Fix: static thread_local accumulator persists across frames.
Results (dual_b1q_0.5, reaper render):
cut@500 = -10.32 dB (EXACT match, was -14.35)
cut@2000 = -11.82 dB (EXACT match, was -6.58)
Both the ×1.805 (OLA normalization) and ×2.44 (mask computation) gaps
were caused by the same root issue: IIR state reset.
- th_b3c0 (0x18000b3c0) = pure complex multiply FIR × audio in freq-domain
- scan3.py: pre-scan approach finds ctx in 1.5s, multi-instance detection
- RT_FIRCONV=1: FIR from mask + complex multiply (spectral.cpp)
- RT_FIRPOWER=1: power-law mask from raw spectrum (framed_model.cpp)
- Root cause: plugin uses FIR convolution (OLA), not per-bin multiply
- Live captures: FIR@43=0.524, mask@43=0.510, final gain=0.305
- Best result: RT_LUT_OFF gives cut@500=-8.18 dB (ref -10.32)
- NOTES_LEVEL 24e/24f/24g appended
Matiq